Discussion:
No RRD graphs! (Catalyst 6509)
bautistaj
2011-10-20 14:01:53 UTC
Permalink
bautistaj [http://community.zenoss.org/people/bautistaj] created the discussion

"No RRD graphs! (Catalyst 6509)"

To view the discussion, visit: http://community.zenoss.org/message/62008#62008

--------------------------------------------------------------
Hello,

I just installed the Cisco Catalyst Zenpack and now finally i'm getting the right descriptions for the ports, but the RRD files are not working at all for the interfaces, nor the CPU/Mem RRD files...i deleted the device, recreated again, running zenperfsnmp against the device, remodel the device, and no luck at all...i know there are some posts about RRD files but nothing seems to work for me :(

I thought that it was the ethernetCsmacd_64, but it's not the case, i use as well the ethernetCsmacd and no luck, BUT when i run the OID against the device i got all the results, i dont understand why its not working...



any ideas, please?

Thanks!

Jose
--------------------------------------------------------------

Reply to this message by replying to this email -or- go to the discussion on Zenoss Community
[http://community.zenoss.org/message/62008#62008]

Start a new discussion in zenoss-users by email
[discussions-community-forums-zenoss--***@community.zenoss.org] -or- at Zenoss Community
[http://community.zenoss.org/choose-container!input.jspa?contentType=1&containerType=14&container=2003]
Shane Scott
2011-10-20 18:59:06 UTC
Permalink
Shane Scott [http://community.zenoss.org/people/hackman238] created the discussion

"Re: No RRD graphs! (Catalyst 6509)"

To view the discussion, visit: http://community.zenoss.org/message/62018#62018

--------------------------------------------------------------
baitistaj:

Can you post the pack so I can check the datasources? If you're not comfortable making it public can you PM it to me?

Thanks!

--Shane W. Scott(Hackman238)
  ZCA - http://community.zenoss.org/community/zca/blog http://community.zenoss.org/community/zca/blog
--------------------------------------------------------------

Reply to this message by replying to this email -or- go to the discussion on Zenoss Community
[http://community.zenoss.org/message/62018#62018]

Start a new discussion in zenoss-users by email
[discussions-community-forums-zenoss--***@community.zenoss.org] -or- at Zenoss Community
[http://community.zenoss.org/choose-container!input.jspa?contentType=1&containerType=14&container=2003]
bautistaj
2011-10-20 19:22:58 UTC
Permalink
bautistaj [http://community.zenoss.org/people/bautistaj] created the discussion

"Re: No RRD graphs! (Catalyst 6509)"

To view the discussion, visit: http://community.zenoss.org/message/62051#62051

--------------------------------------------------------------
Hi Shane,

Thanks for reply!
What do you mean with the pack? the Zenpack? if so, the Zenpack i downloaded from Zenoss website:
http://community.zenoss.org/docs/DOC-10259 http://community.zenoss.org/docs/DOC-10259

Thanks.

Jose
--------------------------------------------------------------

Reply to this message by replying to this email -or- go to the discussion on Zenoss Community
[http://community.zenoss.org/message/62051#62051]

Start a new discussion in zenoss-users by email
[discussions-community-forums-zenoss--***@community.zenoss.org] -or- at Zenoss Community
[http://community.zenoss.org/choose-container!input.jspa?contentType=1&containerType=14&container=2003]
Shane Scott
2011-10-20 19:28:40 UTC
Permalink
Shane Scott [http://community.zenoss.org/people/hackman238] created the discussion

"Re: No RRD graphs! (Catalyst 6509)"

To view the discussion, visit: http://community.zenoss.org/message/62052#62052

--------------------------------------------------------------
bautistaj:

Ah gotcha.

Are your 6509's running CatOS o IOS?

Best,
--Shane W. Scott(Hackman238)
  ZCA - http://community.zenoss.org/community/zca/blog http://community.zenoss.org/community/zca/blog
--------------------------------------------------------------

Reply to this message by replying to this email -or- go to the discussion on Zenoss Community
[http://community.zenoss.org/message/62052#62052]

Start a new discussion in zenoss-users by email
[discussions-community-forums-zenoss--***@community.zenoss.org] -or- at Zenoss Community
[http://community.zenoss.org/choose-container!input.jspa?contentType=1&containerType=14&container=2003]
bautistaj
2011-10-20 19:49:04 UTC
Permalink
bautistaj [http://community.zenoss.org/people/bautistaj] created the discussion

"Re: No RRD graphs! (Catalyst 6509)"

To view the discussion, visit: http://community.zenoss.org/message/62053#62053

--------------------------------------------------------------
yes, its running CatOS, i got the descriptions and until now at least the CPU/Mem graphs have been created but without data, just "nan"...and the interfaces are not showing data at all...i just delete the ZenPack and reinstalling again, adding a "1." to the OID (as it seems to be a solution, at least for the cPU - but not working either) ..now i will add ".1" as well for each interface template and see if it works...
--------------------------------------------------------------

Reply to this message by replying to this email -or- go to the discussion on Zenoss Community
[http://community.zenoss.org/message/62053#62053]

Start a new discussion in zenoss-users by email
[discussions-community-forums-zenoss--***@community.zenoss.org] -or- at Zenoss Community
[http://community.zenoss.org/choose-container!input.jspa?contentType=1&containerType=14&container=2003]
bautistaj
2011-10-20 19:51:59 UTC
Permalink
bautistaj [http://community.zenoss.org/people/bautistaj] created the discussion

"Re: No RRD graphs! (Catalyst 6509)"

To view the discussion, visit: http://community.zenoss.org/message/62054#62054

--------------------------------------------------------------
funny thing, i had to recreate the device with a "different name", 'cause when i recreated it, zenoss didnt create a folder for it...strange..so i used another name to be able to get the folder created. It seems that Zenoss "keeps" the names somewhere?
--------------------------------------------------------------

Reply to this message by replying to this email -or- go to the discussion on Zenoss Community
[http://community.zenoss.org/message/62054#62054]

Start a new discussion in zenoss-users by email
[discussions-community-forums-zenoss--***@community.zenoss.org] -or- at Zenoss Community
[http://community.zenoss.org/choose-container!input.jspa?contentType=1&containerType=14&container=2003]
bautistaj
2011-10-20 20:11:25 UTC
Permalink
bautistaj [http://community.zenoss.org/people/bautistaj] created the discussion

"Re: No RRD graphs! (Catalyst 6509)"

To view the discussion, visit: http://community.zenoss.org/message/62055#62055

--------------------------------------------------------------
other thing that i found....when you created the Device, it shows the right description and right names, BUT inside the perf/devices/devicename i saw :



not the real interface name as i have on Zenoss...is that the wayt it should be?
Thanksks
Jose
--------------------------------------------------------------

Reply to this message by replying to this email -or- go to the discussion on Zenoss Community
[http://community.zenoss.org/message/62055#62055]

Start a new discussion in zenoss-users by email
[discussions-community-forums-zenoss--***@community.zenoss.org] -or- at Zenoss Community
[http://community.zenoss.org/choose-container!input.jspa?contentType=1&containerType=14&container=2003]
Shane Scott
2011-10-21 13:27:14 UTC
Permalink
Shane Scott [http://community.zenoss.org/people/hackman238] created the discussion

"Re: No RRD graphs! (Catalyst 6509)"

To view the discussion, visit: http://community.zenoss.org/message/62066#62066

--------------------------------------------------------------
bautistaj:

Can you repost the directory listing?

What device class do you have the 6509 in?

Best,
--Shane W. Scott(Hackman238)
  ZCA - http://community.zenoss.org/community/zca/blog http://community.zenoss.org/community/zca/blog
--------------------------------------------------------------

Reply to this message by replying to this email -or- go to the discussion on Zenoss Community
[http://community.zenoss.org/message/62066#62066]

Start a new discussion in zenoss-users by email
[discussions-community-forums-zenoss--***@community.zenoss.org] -or- at Zenoss Community
[http://community.zenoss.org/choose-container!input.jspa?contentType=1&containerType=14&container=2003]
bautistaj
2011-10-21 13:51:14 UTC
Permalink
bautistaj [http://community.zenoss.org/people/bautistaj] created the discussion

"Re: No RRD graphs! (Catalyst 6509)"

To view the discussion, visit: http://community.zenoss.org/message/62067#62067

--------------------------------------------------------------
Here it is:

[***@MOP-OPS-MON-10 MOP-GEN-ESW-11.TEST]# ls -la
total 184
drwxr-x---  3 zenoss zenoss  4096 Oct 20 16:07 .
drwxr-x--- 88 zenoss zenoss  4096 Oct 20 16:07 ..
-rw-r--r--  1 zenoss zenoss 35296 Oct 20 16:07 cpu5min_cpu5min.rrd
-rw-r--r--  1 zenoss zenoss 35296 Oct 20 16:07 mem5minFree_mem5minFree.rrd
-rw-r--r--  1 zenoss zenoss 35296 Oct 20 16:07 mem5minUsed_mem5minUsed.rrd
drwxr-x---  3 zenoss zenoss  4096 Oct 20 16:07 os
-rw-r--r--  1 zenoss zenoss 35296 Oct 20 16:07 sysUpTime_sysUpTime.rrd

[***@MOP-OPS-MON-10 interfaces]# ls -la
total 744
drwxr-x--- 93 zenoss zenoss 4096 Oct 20 16:07 .
drwxr-x---  3 zenoss zenoss 4096 Oct 20 16:07 ..
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_10
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_11
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_12
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_13
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_14
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_15
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_16
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_17
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_18
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_19
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_2
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_20
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_21
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_22
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_23
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_24
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_25
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_26
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_27
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_28
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_29
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_3
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_30
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_31
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_32
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_33
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_34
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_35
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_36
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_37
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_38
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_39
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_4
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_40
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_41
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_42
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_43
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_44
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_45
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_46
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_47
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_48
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_5
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_6
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_7
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_8
drwxr-x---  2 zenoss zenoss 4096 Oct 20 16:07 10_100 utp ethernet (cat 3_5)_9

Loading Image... Loading Image...

is that ok?

Thanks!

Jose
--------------------------------------------------------------

Reply to this message by replying to this email -or- go to the discussion on Zenoss Community
[http://community.zenoss.org/message/62067#62067]

Start a new discussion in zenoss-users by email
[discussions-community-forums-zenoss--***@community.zenoss.org] -or- at Zenoss Community
[http://community.zenoss.org/choose-container!input.jspa?contentType=1&containerType=14&container=2003]
bautistaj
2011-10-21 13:59:30 UTC
Permalink
bautistaj [http://community.zenoss.org/people/bautistaj] created the discussion

"Re: No RRD graphs! (Catalyst 6509)"

To view the discussion, visit: http://community.zenoss.org/message/62068#62068

--------------------------------------------------------------
more info...if i run zenperfsnmp :

[***@MOP-OPS-MON-10 interfaces]$ zenperfsnmp run -v10 --device=MOP-GEN-ESW-11.TEST
2011-10-21 09:54:38,801 INFO zen.zenperfsnmp: Initializing daemon...
2011-10-21 09:54:38,802 DEBUG zen.zenperfsnmp: Starting PBDaemon initialization
2011-10-21 09:54:38,802 INFO zen.zenperfsnmp: Connecting to localhost:8789
2011-10-21 09:54:38,804 DEBUG zen.zenperfsnmp: Logging in as admin
2011-10-21 09:54:38,872 INFO zen.zenperfsnmp: Connected to ZenHub
2011-10-21 09:54:38,873 DEBUG zen.zenperfsnmp: Setting up initial services: EventService, SnmpPerfConfig
2011-10-21 09:54:38,873 DEBUG zen.zenperfsnmp: Chaining getInitialServices with d2
2011-10-21 09:54:38,875 DEBUG zen.zenperfsnmp: Loaded service EventService from zenhub
2011-10-21 09:54:38,875 DEBUG zen.zenperfsnmp: Loaded service SnmpPerfConfig from zenhub
2011-10-21 09:54:38,876 DEBUG zen.zenperfsnmp: Queueing event {'severity': 0, 'component': 'zenperfsnmp', 'agent': 'zenperfsnmp', 'summary': 'started', 'manager': 'MOP-OPS-MON-10', 'device': 'localhost', 'eventClass': '/App/Start', 'monitor': 'localhost'}
2011-10-21 09:54:38,876 DEBUG zen.zenperfsnmp: Total of 1 queued events
2011-10-21 09:54:38,889 DEBUG zen.zenperfsnmp: Calling connected.
2011-10-21 09:54:38,889 DEBUG zen.zenperfsnmp: Connected to zenhub
2011-10-21 09:54:38,889 INFO zen.zenperfsnmp: Fetching property items...
2011-10-21 09:55:14,534 DEBUG zen.zenperfsnmp: Updated configCycleInterval config to 360
2011-10-21 09:55:14,535 INFO zen.zenperfsnmp: Getting threshold classes...
2011-10-21 09:55:14,546 DEBUG zen.zenperfsnmp: Loading classes ['Products.ZenModel.MinMaxThreshold']
2011-10-21 09:55:14,550 INFO zen.zenperfsnmp: Checking for outdated configs...
2011-10-21 09:55:14,807 INFO zen.zenperfsnmp: Fetching configs for ['MOP-GEN-ESW-11.TEST']...
2011-10-21 09:55:14,811 INFO zen.zenperfsnmp: Fetching default RRDCreateCommand...
2011-10-21 09:55:14,813 INFO zen.zenperfsnmp: Getting collector thresholds...
2011-10-21 09:55:14,828 DEBUG zen.thresholds: Updating threshold ('high event queue', ('localhost', ''))
2011-10-21 09:55:14,828 DEBUG zen.thresholds: Updating threshold ('zenmodeler cycle time', ('localhost', ''))
2011-10-21 09:55:14,829 DEBUG zen.thresholds: Updating threshold ('zenperfsnmp cycle time', ('localhost', ''))
2011-10-21 09:55:14,829 DEBUG zen.thresholds: Updating threshold ('zenping cycle time', ('localhost', ''))
2011-10-21 09:55:14,829 DEBUG zen.thresholds: Updating threshold ('zenprocess cycle time', ('localhost', ''))
2011-10-21 09:55:14,829 INFO zen.zenperfsnmp: Fetching SNMP status...
2011-10-21 09:55:14,832 INFO zen.zenperfsnmp: Initiating incremental device load
2011-10-21 09:55:14,832 DEBUG zen.zenperfsnmp: Fetching configs for 1 devices
2011-10-21 09:55:14,833 DEBUG zen.zenperfsnmp: Fetching config for ['MOP-GEN-ESW-11.TEST']
2011-10-21 09:55:15,763 DEBUG zen.thresholds: Checking value 0 on Daemons/localhost/zenperfsnmp_eventQueueLength
2011-10-21 09:55:15,764 DEBUG zen.MinMaxCheck: Checking zenperfsnmp_eventQueueLength 0 against min None and max 1000
2011-10-21 09:55:15,764 DEBUG zen.zenperfsnmp: Queueing event {'manager': 'MOP-OPS-MON-10', 'eventKey': 'high event queue', 'device': 'localhost', 'eventClass': '/Perf', 'summary': 'threshold of high event queue restored: current value 0.00', 'component': '', 'monitor': 'localhost', 'agent': 'zenperfsnmp', 'severity': 0}
2011-10-21 09:55:15,764 DEBUG zen.zenperfsnmp: Total of 1 queued events
2011-10-21 09:55:15,764 WARNING zen.zenperfsnmp: Error loading config for devices ['MOP-GEN-ESW-11.TEST']
2011-10-21 09:55:15,764 DEBUG zen.zenperfsnmp: Finished fetching configs for 1 devices
2011-10-21 09:55:15,765 DEBUG zen.zenperfsnmp: Gathering performance data for MOP-GEN-ESW-11.TEST
2011-10-21 09:55:15,765 INFO zen.zenperfsnmp: Configured 1 of 0 devices
*2011-10-21 09:55:15,791 DEBUG zen.zenperfsnmp: Getting device ping issues*
*2011-10-21 09:55:15,796 DEBUG zen.zenperfsnmp: unresponsive devices: []*
*2011-10-21 09:55:15,796 DEBUG zen.zenperfsnmp: Sent a 'stop' event*
*2011-10-21 09:55:15,797 INFO zen.zenperfsnmp: success:0 fail:0 pending:0 todo:0*
*2011-10-21 09:55:15,797 INFO zen.zenperfsnmp: ******** Cycle completed *********
*2011-10-21 09:55:15,797 INFO zen.zenperfsnmp: Sent 0 OID requests*
*2011-10-21 09:55:15,797 INFO zen.zenperfsnmp: Queried 0 devices*
*2011-10-21 09:55:15,797 INFO zen.zenperfsnmp:   0 in queue still unqueried*
2011-10-21 09:55:15,797 INFO zen.zenperfsnmp:   Successes: 0  Failures: 0  Not reporting: 0
2011-10-21 09:55:15,797 INFO zen.zenperfsnmp: Waited on 0 queries from previous cycles.
2011-10-21 09:55:15,798 INFO zen.zenperfsnmp:   Successes: 0  Failures: 0  Not reporting: 0
2011-10-21 09:55:15,798 INFO zen.zenperfsnmp: Cycle lasted 0.00 seconds
2011-10-21 09:55:15,798 INFO zen.zenperfsnmp: *********************************
2011-10-21 09:55:15,799 DEBUG zen.thresholds: Checking value 9.29832458496e-05 on Daemons/localhost/zenperfsnmp_cycleTime
2011-10-21 09:55:15,799 DEBUG zen.MinMaxCheck: Checking zenperfsnmp_cycleTime 9.29832458496e-05 against min None and max 240.0
2011-10-21 09:55:15,800 DEBUG zen.zenperfsnmp: Queueing event {'manager': 'MOP-OPS-MON-10', 'eventKey': 'zenperfsnmp cycle time', 'device': 'localhost', 'eventClass': '/Perf/Snmp', 'summary': 'threshold of zenperfsnmp cycle time restored: current value 0.00', 'component': '', 'monitor': 'localhost', 'agent': 'zenperfsnmp', 'severity': 0}
2011-10-21 09:55:15,800 DEBUG zen.zenperfsnmp: Total of 1 queued events
2011-10-21 09:55:15,812 DEBUG zen.zenperfsnmp: stop() called when not running
2011-10-21 09:55:15,812 INFO zen.zenperfsnmp: Daemon zenperfsnmp shutting down
2011-10-21 09:55:15,813 DEBUG zen.zenperfsnmp: Removing service EventService
2011-10-21 09:55:15,813 DEBUG zen.zenperfsnmp: Removing service SnmpPerfConfig

BUT if i run snmpwalk or get , i got this:

/usr/bin/snmpwalk -v 2c -c community MOP-GEN-ESW-11.TEST 1.3.6.1.4.1.9.9.109.1.1.1.1.5.9
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.5.9 = Gauge32: 4

so i dont understand, i got "unresponsive device" but i got snmp data?!

thanks

JOse
--------------------------------------------------------------

Reply to this message by replying to this email -or- go to the discussion on Zenoss Community
[http://community.zenoss.org/message/62068#62068]

Start a new discussion in zenoss-users by email
[discussions-community-forums-zenoss--***@community.zenoss.org] -or- at Zenoss Community
[http://community.zenoss.org/choose-container!input.jspa?contentType=1&containerType=14&container=2003]
bautistaj
2011-10-24 20:09:01 UTC
Permalink
bautistaj [http://community.zenoss.org/people/bautistaj] created the discussion

"Re: No RRD graphs! (Catalyst 6509)"

To view the discussion, visit: http://community.zenoss.org/message/62080#62080

--------------------------------------------------------------
Hello eveybody!
Finally its fixed!..what i had to do:
- run zendmd
     reindex()
     commint()
everytime i had to create a new device for the Catalyst class...re-model
then stop and start again zenoss...

and now, finally i'm getting stats for all the interfaces.... :)

Thanks eveyone!

Jose
--------------------------------------------------------------

Reply to this message by replying to this email -or- go to the discussion on Zenoss Community
[http://community.zenoss.org/message/62080#62080]

Start a new discussion in zenoss-users by email
[discussions-community-forums-zenoss--***@community.zenoss.org] -or- at Zenoss Community
[http://community.zenoss.org/choose-container!input.jspa?contentType=1&containerType=14&container=2003]
bend chen
2011-10-21 06:41:06 UTC
Permalink
bend chen [http://community.zenoss.org/people/bend] created the discussion

"Re: No RRD graphs! (Catalyst 6509)"

To view the discussion, visit: http://community.zenoss.org/message/62059#62059

--------------------------------------------------------------
i think you may configure 6509  layer2 switch.and use zenoss monitor  layer2 IP address.
(catos  6509 is two device(layer2 and layer3) bind to one device,layer2 is a switch.layer3 is route.)
--------------------------------------------------------------

Reply to this message by replying to this email -or- go to the discussion on Zenoss Community
[http://community.zenoss.org/message/62059#62059]

Start a new discussion in zenoss-users by email
[discussions-community-forums-zenoss--***@community.zenoss.org] -or- at Zenoss Community
[http://community.zenoss.org/choose-container!input.jspa?contentType=1&containerType=14&container=2003]
Loading...